Ideas to Make Swivel Chairs for Living Room
Swivel chairs for living room – The basics of making a swivel chair are simple. There are six main parts of a swivel chair. From there it becomes a puzzle to fit the pieces together to make a complete chair. Gather all the things you need, and if there is something you do not have, you can buy them at almost any hardware store.
Lightly grease the gas cylinder and start assembling the bearing kit on the gas cylinder. There will be around six washers, and they have to be greased before they can be attached to your gas cylinder. Start with rubber cushion, and follow up with washer 15/16 inches. Now apply the bearing, which normally has five small balls in it. After the bearing, place a liberal grease lubrication application around the bearing. Now place the other 15/16 inch washer on the gas cylinder.
Slide the gas cylinder into the column of the chair along with the support kit previously attached to the gas cylinder. Apply the smallest washer to the kit on the bottom of the chair column. Insert the included clip into the support kit in its place at the bottom of the chair column. Check to make sure it is secure in place. Place the folding cover over the column of the swivel chair. After having assembled the column of the chair, you can slide the hinged cover over the column.